How to Reset a Liftmaster Garage Door Opener - Method2
Erasing the Motor’s Memory
-
1. Press and hold the “Learn” button for roughly 6 seconds. Press firmly down on the button to engage it. When you press it, you’ll notice that a small LED lights up next to the button. Continue pressing down until the LED goes out. This will erase all remote-control and keyless entry codes that had been connected to the garage door.- If your fingers are too large to push the small button, try poking it with the tip of a pen.
-
2. Press and hold the button again to erase linked smart devices. If you have a smart phone or tablet linked to your garage door, they will still be active at this point. If you’d like to de-link these devices, press down on the “Learn” button a second time. Hold it down for 6 seconds. When the light goes out, all linked devices will have been de-linked.- Liftmaster smart garage door openers can be connected to smartphones and tablets via the “myQ” setting. To use myQ, download the myQ app from the Apple or Google Play store. Set up an account on the app if you don’t already have one. From there, follow the app’s directions to connect myQ to your home Wi-Fi network and hook it up with your smart garage door opener.[4]
-
3. Test the remote-control button to make sure it’s de-linked. Safely climb down from the ladder. Then, fetch your garage door’s remote control opener. Click the button to check and make sure that the garage door does not open. If you de-linked any smart devices, double check those to make sure they can’t still open your garage door either.[5]- If you have more than 1 garage door, you’ll need to reset each unit individually.
https://www.wikihow.com/